Motors
Here we'll show motors position within the system.
Index List
Below is a comprehensive list of all the different sensors utilized for monitoring and operating the BioDryer.
| Description | Characteristics | Section | Quantity | VTF |
|---|---|---|---|---|
| Body Rotation Motor | 3.7 kW | BioDryer Skid | 4 | Yes |
| Inlet Blower Motor | 7.5 kW | Air Skid | 1 | Yes |
| Outlet Blower Motor | 7.5 kW | Air Skid | 1 | Yes |
| Condensate Water Pump Motor | 0.75 kW | Air Skid | 1 | No |
| Screw Conveyor Motor | 3.7 kW | Screw Conveyor | 1 | No |
Body Rotation Motor
Here the four motors that take care of rotating the BioDryer body.
(1)Body Rotation Motor N°1 (2)Body Rotation Motor N°2 (3)Body Rotation Motor N°3 (4)Body Rotation Motor N°4
Inlet Blower Motor
This motor is connected to the blower which pushes air from the outside into the air piping system.
(1)Inlet Blower Motor
Outlet Blower Motor
This motor powers the blower which draws air from the biodryer body and directs it to the designated filtration unit through the air piping system.
(1)Outlet Blower Motor
Condensate Water Pump Motor
Here is the motor responsible for rotating the pump to discharge the condensate tank when it reaches full capacity.
(1)Condensate Water Pump Motor
Screw Conveyor Motor
Here is the motor that drives the screw to convey the sludge and load it into the biodryer.
(1)Screw Conveyor Motor